Peek filament2/23/2023 ![]() ![]() Then let the part slowly cool until it has reached room temperature again. Reduce the temperature to 150☌ for thirty minutes. Then raise the temperature to 200☌ for another hour. Raise the temperature of the oven to 150☌ for one hour. Both the part as well as the oven should be at room temperature when you start annealing. As with all 3D printing this is also true for PEEK 3D printing the slower the 3D printing speed. The bed temperature should always be at a minimum of 120 degrees. During the handling of silicon wafers PEEK components minimize contamination and maximize safetyĪnnealing a printed part in an oven de-stresses the part and improves its mechanical properties. PEEK can be 3D printed in temperatures that range from 370 degrees to 450 degrees.Used as electrical components for long-term operating conditions Material: PEEK Diameter:1.75mm Tolerance:+/-0.03mm OEM:Accept Description: Melovy PEEK as a representative material of special. ![]() Intricate tubing material for wire protection. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |